Pressfitting systems in copper and bronze, aesPRES / Bronze
https://www.racmet.com/en-ww/aes-pres.aspx
O-Rings can be used between  -20 and +120 °C, maximum pressure 16bar providing for quality and safety as well.

Pressfitting systems in carbon steel, steelPRES / Carbon steel
https://www.racmet.com/en-ww/steel-pres.aspx
 O-Rings can be used between -20 and +120°C, minimum pressure 16bar providing for quality and safety as well.

PN16
https://www.racmet.com/en-ww/pn16.aspx
Communication > Glossary > PN16 PN16 Nominal pressure 16 bar; maximum internal allowable pressure (in bar) of a mechanical component, considering a temperature of 20 °C.

Services
https://www.racmet.com/en-ww/the-services.aspx
The study of any material, burst tests, pressure tests and certifications provide for the product quality and increase the technical department expertise.

What is the Oversize?, The expert answers
https://www.racmet.com/en-ww/what-is-the-oversize.aspx
The Oversize range can be pressed with the dedicated machine Novopress ACO401/403 and dedicated chains, specifically manufactured for special, high-pressure applications up to the size 168,3 mm.

What are the inoxPRES Steam and the inoxPRES Silicone Free?, The expert answers
https://www.racmet.com/en-ww/what-are-the-inoxpres-steam-and-the-inoxpres-silicone-free.aspx
The Steam (ST) range is a new pressfitting range, made of STEAM stainless steel with a white O-Ring, designed for saturated vapour installations with a maximum temperature of 165°C and maximum pressure of 7 bar.

The applications of the inoxPRES Steam pressfitting systems, LAB
https://www.racmet.com/en-ww/inoxpres-steam-range-v1.aspx
Academy > LAB > The applications of the inoxPRES Steam pressfitting systems The applications of the inoxPRES Steam pressfitting systems The inoxPRES STEAM range with white O-Ring can be used for saturated steam installations with a maximum temperature of 165°C and a maximum pressure of 7 absolute bars.

Pressfitting systems leak test, LAB
https://www.racmet.com/en-ww/prove-di-tenuta-v1.aspx
Academy > LAB > Pressfitting systems leak test Pressfitting systems leak test Leak test in the RacMet LAB Matteo AVANZI – Technical & Sales Consultant In RacMet Academy Lab, there is a particular equipment designed to perform 4 different pressure tests on our press fitting systems. ... In the next lines, there are pressed installations with different bars: 8 bars, [...]

waste systems manufacture, Waste systems
https://www.racmet.com/en-ww/drain-systems-in-stainless-steel.aspx
The push-fit collars of the DRAIN systems by Raccorderie Metalliche stand operating pressures up to 10 bar, and (vacuum) depressions up to 0.97 bar.

Equipment
https://www.racmet.com/en-ww/equipment.aspx
Each pressing machine exercises pressures for a precise time, based on the size of the jaw or chain assembled, ensuring optimum and repeatable pressing.