Pressfitting systems for Compressed Air Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-compressed-air-installations.aspxDepending on the residual oil present in the compressed air lines, it will be necessary to check that the EPDM O-Ring is suitable, or if necessary, replace it with the FKM O-Ring. For example, for compressed air in class 5, with an oil content that is higher than 5 MG/M3, it is recommended to use the FMK O-Ring, resistant to oils and [...]
How to install Pressfitting 76-108 mm, Events and News, Raccorderie Metallichehttps://www.racmet.com/en-ww/how-to-install-pressfitting-76-108-mm.aspx The hydraulic seal is guaranteed by the O-ring deformed in its section: thanks to its elasticity, it guarantees the joint's permanent tightness.
Pressfitting systems leak test, LABhttps://www.racmet.com/en-ww/prove-di-tenuta-v1.aspxLet’s start from the bottom In this first line, there is a non-pressed fitting and, thanks to our patented lenticular O-ERing, it can be immediately identified through an immediate dropping.
Jawshttps://www.racmet.com/en-ww/jaws.aspxCommunication > Glossary > Jaws Jaws Equipment; components of pressfitting systems; tools. systems in sizes ø 22÷35 mm have to pressed using jaws.
marinePREShttps://www.racmet.com/en-ww/marinepres.aspx Communication > Glossary > marinePRES marinePRES Pressfitting system composed of pipes and fittings, with “M-shaped” profile, made of cupronickel; available in sizes ø 15÷108 mm.
Raccorderie Metalliche wins the Best Stand of 2019, Events and News, Raccorderie Metallichehttps://www.racmet.com/en-ww/raccorderie-metalliche-wins-the-best-stand-of-2019.aspx"The component identified in most of the answers was the O-ring.
Pressfitting systems for Potable Water Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-potable-water-installations.aspxBoth systems are equipped with a patented lenticular O-Ring in EPDM suitable for the conveyance of drinking water that meets all the requirements of the certification entities and passed the strict hygiene tests.
Pressfitting systems for Solar Thermal Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-solar-thermal-installations.aspxThe pipes connecting the solar panels and the sanitary water system are generally made of three types of materials: - carbon steel (for the primary circuit) - copper or stainless steel (for both the primary and secondary circuits) Raccorderie Metalliche produces three pressfitting systems with these materials: - steelPRES system (in carbon steel) - aesPRES system (in copper) - inoxPRES [...]
Pressfitting systems for Gas Distribution Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-gas-distribution-installations.aspxIn compliance with the regulations, all fittings in the 4 ranges of Raccorderie Metalliche are externally marked in yellow and they are equipped with a specific yellow O-Ring.
Pressfitting systems for Heating and Cooling Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-heating-and-cooling-installations.aspxPressfitting systems inoxPRES (316L stainless steel), steelPRES (galvanized carbon steel) and aesPRES (copper) with black O-Ring in EPDM can be used in hot water heating circuits and in cooling and cryogenic circuits. inoxPRES and aesPRES systems can be used in open and closed circuits while the steelPRES system can only be used in closed circuits.