Raccorderie Metalliche and heating plantshttps://www.racmet.com/en-ww/heating-plants.aspx steelPRES fittings are pre-fitted EPDM O-Rings, a compound providing for the best possible performances: PM16 maximum pressure, temperature ranging between -20/+120° C and quality in time. ... All inoxPRES fittings are pre-fitted EPDM O-Ring, developed to be used [...]
Raccorderie Metalliche and cooling plantshttps://www.racmet.com/en-ww/cooling-plants.aspx steelPRES fittings are pre-fitted EPDM O-Rings, a compound providing for the best possible performances: PM16 maximum pressure, temperature ranging between -20/+120° C and quality in time. ... All inoxPRES fittings are pre-fitted EPDM O-Ring, developed to be used [...]
Pressfitting systems for Compressed Air Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-compressed-air-installations.aspxDepending on the residual oil present in the compressed air lines, it will be necessary to check that the EPDM O-Ring is suitable, or if necessary, replace it with the FKM O-Ring. For example, for compressed air in class 5, with an oil content that is higher than 5 MG/M3, it is recommended to use the FMK [...]
Pressfitting systems for Heating and Cooling Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-heating-and-cooling-installations.aspxPressfitting systems inoxPRES (316L stainless steel), steelPRES (galvanized carbon steel) and aesPRES (copper) with black O-Ring in EPDM can be used in hot water heating circuits and in cooling and cryogenic circuits. inoxPRES and aesPRES systems can be used in open and closed circuits while the steelPRES system can only be used in closed [...]
Pressfitting systems for Potable Water Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-potable-water-installations.aspxBoth systems are equipped with a patented lenticular O-Ring in EPDM suitable for the conveyance of drinking water that meets all the requirements of the certification entities and passed the strict hygiene tests.
inoxPRES Oversize for the heating plants in a major energy company in Norway, Our storieshttps://www.racmet.com/en-ww/inoxpres-oversize-for-the-heating-plants-in-a-major-energy-company-in-norway.aspxThanks to the EPDM O-ring, resistance to temperatures of between -20° C and +120° C is guaranteed as well as a maximum operating pressure of PN16.
Action! inoxPRES installed in film studios in Germany!, Our storieshttps://www.racmet.com/en-ww/action-inoxpres-installed-in-film-studios-in-germany.aspx In fact, the installation of the 168 to be welded takes about 45 minutes against the 2 minutes and 21 seconds that the same measure needs for the assembly to be pressed. inoxPRES is particularly suitable for heating and cooling systems, thanks also to the presence of the EPDM O-Ring with a patented profile, which guarantees a [...]