Steelpreshttps://www.racmet.com/en-ww/steelpres.aspxPressfitting system composed of pipes and fittings, with an “M-shaped” profile, made of E195 carbon steel, available in diameters 15-108mm
collars and fixing systems production, Collars and fixing systemshttps://www.racmet.com/en-ww/collars-and-fitting-systems.aspxThe product range Inside the company catalogue, the product range in YELLOW includes: profiles, angle bars, brackets, supports and supports for external units bolts and dowels adapters and clips fixing collars to steel pipes, polyethylene pipes, rubber collars, copper collars (3/8’’ to 8’’) The PratiKO range The Pratiko [...]
HThttps://www.racmet.com/en-ww/ht.aspxInoxPRES “Silicone free” range of products; made of stainless steel, with FKM O-Ring used in the industrial sector, where degreasing conditions of all components, pipes and fittings are mandatory for a correct management of the whole plant.
inoxPREShttps://www.racmet.com/en-ww/inoxpres-v1.aspx Communication > Glossary > inoxPRES inoxPRES The correct wording of this system is inoxPRES, and not inoxPRESS, inox PRESS, inox PRES; Pressfitting system composed of pipes and fittings, with “M-shaped” profile, made of stainless steel (inox) in AISI 316L; available in sizes ø 15÷168 mm.
How to install the Waste System (Pushfitting), LABhttps://www.racmet.com/en-ww/how-to-install-the-waste-system-pushfitting.aspx Academy > LAB > How to install the Waste System (Pushfitting) How to install the Waste System (Pushfitting) The RM DRAIN Assembling procedure asks for simple and rapid manual operations, with no specific or expansive tool The RM DRAIN assembling procedure Mark the connection dimension on the pipe. ... Insert the pipe into the fitting - insert the [...]
Pressfitting systems in stainless steel, inoxPRES / Stainless steelhttps://www.racmet.com/en-ww/inoxpres.aspxFittings in 316L stainless steel can be fitted to a wide range of pipes, from 15 to 168 mm diameters, in 316L, 304L and 444 steel. ... The wide range of inoxPRES pipes and pipe fittings are approved by many international certification institutions. ... A wide range of fittings and pipes Ø 15 - 168 [...]
Silicone freehttps://www.racmet.com/en-ww/silicone-free.aspxInoxPRES “Silicone free” range of products; made of stainless steel, with FKM O-Ring used in the industrial sector, where degreasing conditions of all components, pipes and fittings are mandatory for a correct management of the whole plant.
Inoxpres Gashttps://www.racmet.com/en-ww/inoxpres-gas-v1.aspxCommunication > Glossary > Inoxpres Gas Inoxpres Gas inoxPRES GAS; Pressfitting system composed of pipes and fittings, with “M-shaped” profile, made of stainless steel (inox) in AISI 316L for all natural and LPG applications; available in sizes ø 15÷108 mm.
Pressfitting systems in cupronickel, marinePRES / Cupro Nickelhttps://www.racmet.com/en-ww/marine-pres.aspxThe material in time proved to be the most resistant and performing solution in saline ambiences. marinePRES material Cupronickel 90/10. marinePRES system consists of pipes, fittings, tools and installation materials. 5 certifications, obtained by Raccorderie Metalliche on the marinePRES product, confirm quality and reliability for applications such as heating, cooling, [...]
What are the dimensional characteristics of the O-Rings assembled on pressfitting joints?, The expert answershttps://www.racmet.com/en-ww/what-are-the-dimensional-characteristics-of-the-o-rings-assembled-on-pressfitting-joints.aspxThe section, 20% bigger than the traditional O-Ring with circular-section, performs better, in that: it fills properly all the interstices, reducing the fluid deposit between the coupling and the clutch; it significantly reduces damages to the O-Ring while fitting it to the pipe; it increases the contact surface between the O-Ring and the pipe, significantly [...]