press tools and accessories, Toolinghttps://www.racmet.com/en-ww/tooling.aspx Products > Pressfittings > Tooling Tooling Certified tooling for any pressfitting The pressfitting system consists of three parts: joints, pipes and pressing machines. The machines should press the joint on the pipe. The pressing machines acts on the joint pressing through jaws and collars providing for the required mechanical tightness (between [...]
The complete range of inoxPRES pipes and fittings at the famous brewery in Latvia, Our storieshttps://www.racmet.com/en-ww/the-complete-range-of-inoxpres-pipes-and-fittings-at-the-famous-brewery-in-latvia.aspx Case history > Our stories > The complete range of inoxPRES pipes and fittings at the famous brewery in Latvia The complete range of inoxPRES pipes and fittings at the famous brewery in Latvia 03/29/2024 Reference WINERIES & BREWERIES Due Latvia Year 2024 Applications Sanitary water - Compressed air - Process water Product ranges used inoxPRES Material [...]
Gashttps://www.racmet.com/en-ww/gas.aspxGas and LGP plants require pipes and fittings that are highly rated in terms of quality and safety.
Marinepreshttps://www.racmet.com/en-ww/marinepres.aspxCommunication > Glossary > Marinepres Marinepres Pressfitting system composed of pipes and fittings, with “M-shaped” profile, made of cupronickel; available in sizes ø 15÷108 mm.
Cutterhttps://www.racmet.com/en-ww/cutter.aspxCommunication > Glossary > Cutter Cutter Cutting tool; tools for pressfitting systems; tool for cutting pipes; alternatively, you may use fine-tooth saws or electromechanical saws.
Aespreshttps://www.racmet.com/en-ww/aespres.aspxCommunication > Glossary > Aespres Aespres Pressfitting system composed of pipes and fittings, with an “M-shaped” profile, made of copper and bronze; available in 12-54mm diameters
waste systems manufacture, Waste systemshttps://www.racmet.com/en-ww/drain-systems-in-stainless-steel.aspx Products > Waste systems Waste systems RM Drain RM DRAIN is a Push Fit system by Raccorderie Metalliche, consisting of thin pipes and fittings in AISI 316L stainless steel. ... What is more it is reversible: heating the gasket with a hot air source, it is possible to separate the joint from the pipe. ... Check if the parts are clean Mark the [...]
What do you mean by homologated pressfitting system?, The expert answershttps://www.racmet.com/en-ww/what-do-you-mean-by-homologated-pressfitting-system.aspxHomologated pressfiting is the permanent junction between pipes and fittings through an assembly process that is certain, defined and verified by a product certification Body. Pressfitting system is composed of pipes, joints with the related O-Rings, and the pressing equipment used to obtain such permanent junction.
pressfitting systems, Pressfittingshttps://www.racmet.com/en-ww/pressfittings.aspxPressfitting is a joining between pipes with fittings fitted through electro-mechanical pressing machines. ... An alternative to brazing is the use of plastic pipes, adhesively jointed. ... A 25 to 50% installation time reduction as reported by the company installers, on plants using big diameter pipes. ... The electromechanical tool press [...]
Deburringhttps://www.racmet.com/en-ww/deburring.aspxCommunication > Glossary > Deburring Deburring Deburring tool; pipe deburring; tool for pressfitting systems; tool to remove chips and impurities in the tube cutting area as to avoid damaging the o-ring during fitting.