Bronze Joints. Which are the fields of application?, The expert answershttps://www.racmet.com/en-ww/bronze-joints-which-are-the-fields-of-application.aspxThe mounted O-Rings can be used at different temperatures, -20 to +120 °C, maximum pressure 16bar providing for quality and safety as well.
Pressfitting systems for Compressed Air Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-compressed-air-installations.aspxDepending on the residual oil present in the compressed air lines, it will be necessary to check that the EPDM O-Ring is suitable, or if necessary, replace it with the FKM O-Ring. For example, for compressed air in class 5, with an oil content that is higher than 5 MG/M3, it is recommended to use the FMK [...]
Raccorderie Metalliche and cooling plantshttps://www.racmet.com/en-ww/cooling-plants.aspx steelPRES fittings are pre-fitted EPDM O-Rings, a compound providing for the best possible performances: PM16 maximum pressure, temperature ranging between -20/+120° C and quality in time. ... All inoxPRES fittings are pre-fitted EPDM O-Ring, developed to be used providing for the highest [...]
Raccorderie Metalliche and heating plantshttps://www.racmet.com/en-ww/heating-plants.aspx steelPRES fittings are pre-fitted EPDM O-Rings, a compound providing for the best possible performances: PM16 maximum pressure, temperature ranging between -20/+120° C and quality in time. ... All inoxPRES fittings are pre-fitted EPDM O-Ring, developed to be used providing for the highest [...]
press tools and accessories, Toolinghttps://www.racmet.com/en-ww/tooling.aspx The hydraulic tightness is provided by the presence of the patented lenticular O-ring inside each joint.
Serviceshttps://www.racmet.com/en-ww/the-services.aspxOur patents The company constantly committed to develop original and innovating solutions. 4 patents for press systems: O-Ring for pressfitting Drop O-Ring Hydro-shaped Ts Pressfitting instrumented fittings 2 patents for clamps and fitting systems: Dowel screw or latching screw Vessel and bidet supporting [...]
Pressfitting systems for Solar Thermal Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-solar-thermal-installations.aspxThe pipes connecting the solar panels and the sanitary water system are generally made of three types of materials: - carbon steel (for the primary circuit) - copper or stainless steel (for both the primary and secondary circuits) Raccorderie Metalliche produces three pressfitting systems with these materials: - steelPRES system (in carbon steel) - aesPRES system (in copper) - inoxPRES [...]
Silicone free systemshttps://www.racmet.com/en-ww/silicon-free-systems.aspxRaccorderie Metalliche has set up a whole range of Inoxpres system ‘’Silicone Free’’ with the FKM o-ring, tested and following the highest standards of cleanness which allows to respect the ASTM international standards.
Pressfitting systems for Gas Distribution Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-gas-distribution-installations.aspxIn compliance with the regulations, all fittings in the 4 ranges of Raccorderie Metalliche are externally marked in yellow and they are equipped with a specific yellow O-Ring.
The pressfitting systems by Raccorderie Metalliche in a Lombardy hospital, Our storieshttps://www.racmet.com/en-ww/the-pressfitting-systems-by-raccorderie-metalliche-in-al-lombardy-region-hospital.aspxThe advantages of the inoxPRES and steelPRES system: 50% reduction in installation times compared to traditional systems. safe installation as the joint is made at room temperature, it does not involve glues, resins or open flames allowing the installer to work safely even in contact with flammable materials or substances. guarantee of a high level of hygiene thanks to the use of 316L [...]