SHK Essen 2016, Events and News, Raccorderie Metallichehttps://www.racmet.com/en-ww/shk-essen-2016.aspxIn particular inoxPRES and steelPRES were protagonists of Raccorderie Metalliche’s booth with many other important news: The most talked from our visitors were: the extended seamless reduced Tee diameter range; inoxPRES is now VdS certified up to diameter 88.9; and the new tool ECO301 has been released for better performances on inoxPRES and steelPRES fittings [...]
Pressfitting systems for Solar Thermal Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-solar-thermal-installations.aspxThe pipes connecting the solar panels and the sanitary water system are generally made of three types of materials: - carbon steel (for the primary circuit) - copper or stainless steel (for both the primary and secondary circuits) Raccorderie Metalliche produces three pressfitting systems with these materials: - steelPRES system (in carbon steel) - aesPRES system (in copper) - inoxPRES [...]
A meeting that is not just educational but an experience too., Events and News, Raccorderie Metallichehttps://www.racmet.com/en-ww/il-pressfitting-dalla-terra-al-cielo.aspxA meeting that is not just educational but an experience too. 07/17/2017 Piano 35, in Intesa Sanpaolo skyscraper, in Turin will be hosting Raccorderie Metalliche, installers and designers telling about the advantages of press fitting and the latest projects from over 150 metres high.
Pressfitting systems for Wastewater Installations, LABhttps://www.racmet.com/en-ww/wastewater.aspxRM Drain is a coupling drainage system, consisting of tubes, fittings and scuppers in thin AISI 316L stainless steel, suitable for conveying waste and process water, both under gravity and vacuum.
The pressfitting systems by Raccorderie Metalliche in a Lombardy hospital, Our storieshttps://www.racmet.com/en-ww/the-pressfitting-systems-by-raccorderie-metalliche-in-al-lombardy-region-hospital.aspxThe advantages of the inoxPRES and steelPRES system: 50% reduction in installation times compared to traditional systems. safe installation as the joint is made at room temperature, it does not involve glues, resins or open flames allowing the installer to work safely even in contact with flammable materials or substances. guarantee of a high level of hygiene thanks to the use of 316L [...]
Sports Centre in Estonia, Raccorderie Metalliche products from the steelPRES carbon steel range were installed for the heating plant, Our storieshttps://www.racmet.com/en-ww/sports-centre-in-estonia-raccorderie-metalliche-products-from-the-steelpres-carbon-steel-range-were-installed-for-the-heating-plant.aspxRaccorderie Metalliche's press-fit systems made it possible to install the plant in a third of the time compared to traditional methods, while guaranteeing very high quality and a long service life.
Pressfitting systems in the Ferghettina winery, Our storieshttps://www.racmet.com/en-ww/pressfitting-systems-in-the-ferghettina-winery.aspxThe advantages of the solution proposed by Raccorderie Metalliche were: the simplicity is intrinsic in the characteristics of the system: cut, fit and clamp, no license, no flame. the speed allows to reduce installation times by up to 60% compared to traditional systems the safety is given by the absence of fire risks and by the maintenance of a clean and orderly working [...]
pressfitting systems in an urban area of Milan, Our storieshttps://www.racmet.com/en-ww/pressfitting-systems-in-an-urban-area-of-milan.aspxThe advantages of the solution proposed by Raccorderie Metalliche were: high performance, quality and safety over time. inoxPRES meets the most stringent European regulations for safety in drinking water systems. time savings in the installation phase compared to traditional systems built with weld fittings. labour cost savings due to the reduced installation times of the system
A special moment dedicated to the 25 years of Pressfitting!, Highlights, Raccorderie Metallichehttps://www.racmet.com/en-ww/a-special-moment-dedicated-to-the-25-years-of-pressfitting.aspxOur company is currently celebrating 25 years since the launch of the first press fitting, now available in four materials: stainless steel, copper, Cupronickel, and galvanised carbon steel, along with the addition of both M profile and V profile ranges. We have also patented a new fitting named Uniko, which offers the significant advantage of being [...]
RacMet Lab Presentation, LABhttps://www.racmet.com/en-ww/racmet-lab-presentation.aspxIt was designed to create real settings, similar to real applications, thus giving a strong aesthetic impact but maintaining the ultimate goal: explain the use of our press fitting systems.