Pressfitting systems in stainless steel, inoxPRES / Stainless steelhttps://www.racmet.com/en-ww/inoxpres.aspxJoints are fitted with an “M-shaped” profile toroidal chamber, optimised thanks to Raccorderie Metalliche experience, where a patented profiled O-Ring is fitted directly at the end of production. ... A wide range of reliable the Raccorderie Metalliche patented O-Ring fitting. ... [...]
Pressfitting systems for Compressed Air Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-compressed-air-installations.aspxDepending on the residual oil present in the compressed air lines, it will be necessary to check that the EPDM O-Ring is suitable, or if necessary, replace it with the FKM O-Ring. For example, for compressed air in class 5, with an oil content that is higher than 5 MG/M3, it is recommended to use the FMK [...]
Raccorderie Metalliche and heating plantshttps://www.racmet.com/en-ww/heating-plants.aspx steelPRES fittings are pre-fitted EPDM O-Rings, a compound providing for the best possible performances: PM16 maximum pressure, temperature ranging between -20/+120° C and quality in time. ... All inoxPRES fittings are pre-fitted EPDM O-Ring, developed to be used providing for the highest [...]
Raccorderie Metalliche and cooling plantshttps://www.racmet.com/en-ww/cooling-plants.aspx steelPRES fittings are pre-fitted EPDM O-Rings, a compound providing for the best possible performances: PM16 maximum pressure, temperature ranging between -20/+120° C and quality in time. ... All inoxPRES fittings are pre-fitted EPDM O-Ring, developed to be used providing for the highest [...]
press tools and accessories, Toolinghttps://www.racmet.com/en-ww/tooling.aspx The hydraulic tightness is provided by the presence of the patented lenticular O-ring inside each joint.
Pressfitting systems for Solar Thermal Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-solar-thermal-installations.aspxThe pipes connecting the solar panels and the sanitary water system are generally made of three types of materials: - carbon steel (for the primary circuit) - copper or stainless steel (for both the primary and secondary circuits) Raccorderie Metalliche produces three pressfitting systems with these materials: - steelPRES system (in carbon steel) - aesPRES system (in copper) - inoxPRES [...]
Pressfitting systems for Heating and Cooling Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-heating-and-cooling-installations.aspxPressfitting systems inoxPRES (316L stainless steel), steelPRES (galvanized carbon steel) and aesPRES (copper) with black O-Ring in EPDM can be used in hot water heating circuits and in cooling and cryogenic circuits. inoxPRES and aesPRES systems can be used in open and closed circuits while the steelPRES system can only be used in closed circuits.
Pressfitting systems for Gas Distribution Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-gas-distribution-installations.aspxIn compliance with the regulations, all fittings in the 4 ranges of Raccorderie Metalliche are externally marked in yellow and they are equipped with a specific yellow O-Ring.
Raccorderie Metalliche wins the Best Stand of 2019, Events and News, Raccorderie Metallichehttps://www.racmet.com/en-ww/raccorderie-metalliche-wins-the-best-stand-of-2019.aspx"The component identified in most of the answers was the O-ring.
Pressfitting systems for Potable Water Installations, LABhttps://www.racmet.com/en-ww/pressfitting-systems-for-potable-water-installations.aspxBoth systems are equipped with a patented lenticular O-Ring in EPDM suitable for the conveyance of drinking water that meets all the requirements of the certification entities and passed the strict hygiene tests.